Ningjin County Xinwei Insulation Equipment Factory

The production process of foamed cement insulation board production equipment:
, loading, and mixing: add a certain amount of cement, foaming agent, and foam stabilizing enhancer to the mixer through the loading system for dry mixing seconds;
, Stirring: Add a certain amount of warm water to the mixer and stir for 1 minute; Add a certain amount of foaming agent to the mixer and stir for 1 second;
, Injection molding, Foaming: Then inject the slurry into the mold for foaming The process takes about - minutes;
Initial curing: After the injection molding is completed, let it sit for several hours for initial curing;
Demoulding: The foamed cement insulation board can be demoulded when it has completed initial setting and has initial strength. ;
, Cutting: The foam cement insulation board blank with a certain strength can be cut after demoulding. The cutting specifications are adjusted according to the needs;
Finished product maintenance: Foam cement insulation board maintenance period It should be no lower than the sky.
Shandong Xinwei Insulation Equipment specializes in the production of exterior wall fireproof board equipment, foamed cement insulation board production equipment, perlite exterior wall insulation board equipment.

-bb_copy